V8 Supercars 3

Hints:
------
Submitted by: mark

In setup mode for your v8 supercars adjustment of camber should always
be negative and i set mine about 1 to - 1.8 for tight long straighted 
tracks and for lots of corner tracks -1.8 to-2.3.and 0 to -0.5 for the
rear.front toe should be set to +1 to +2 this is to help offset the - 
degrees of camber and also because the v8 supercars are rear wheel drive,
so they tend to push the front wheels out hence you putting a +toe in to 
the front.Try the lowest settings first and then gradually chang higher 
until satisfied with vehicle handling. Hope this can be of help or 
starting point in v8 supercars three vehicle geometry.If anyone has any
hints or tricks i am always willing to learn cheers.